BKBPF - PR-1009 RUBBER SOLUTION

Export as PDF
Product Identification

Product ID:PR-1009 RUBBER SOLUTION
MSDS Date:08/10/1989
FSC:8030
NIIN:01-293-3273
MSDS Number: BKBPF

Responsible Party
PRODUCTS RESEARCH & CHEMICAL CORPORATION
5430 SAN FERNANDO ROAD
GLENDALE, CA 91209
US

Emergency Phone: 800-424-9300/ 800-228-5635

Info Phone: 818-240-2060

Preparer: SP

Cage: DO563

Contractor
PRODUCTS RESEARCH & CHEMICAL
1800 GLENDALE, CA 91209 US

Telephone: 818-240-2060

Cage: DO563

Ingredients

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 35%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


PETROLEUM DISTILLATE

CAS: 8030-30-6

RTECS: DE3030000

Fraction By Weight: 40%

OSHA PEL 400 PPM


METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 25%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


712

RTECS: 9999999VO

Hazards

Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. VAPORS AND MIST MAY
CAUSE BURNING, TEARING, REDNESS AND SWELLING. SKIN: IRRITATION,
REDNESS, BURNING, DRYING AND CRACKING. INHALATION: RESPIRATORY
IRRITATION, HEADACHE, NAUSEA AND AN ESTHESIA DUE TO EXCESSIVE
INHALATION. INGESTION: IRRITATION OF DIGESTIVE TRACT, SIGNS OF
NERVOUS SYSTEM DEPRESSION.
Effects of Overexposure:INGESTION-NERVOUS SYSTEM DEPRESSION:
DROWSINESS, DIZZINESS, LOSS OF COORDINATION AND FATIGUE.

First Aid

First Aid:EYES: FLUSH WITH WATER. CONSULT A PHYSICIAN. SKIN: WASH WITH
SOAP AND WATER. IF SYMPTOMS PERSIST, CONSULT A PHYSICIAN.
INHALATION: REMOVE TO FRESH AIR. IF SYMPTOMS ARE PRESENT, CONSULT A
PHYSICIAN. IN GESTION: DO NOT INDUCE VOMITING. CONSULT A PHYSICIAN.

Fire Fighting

Flash Point Method:PMCC
Flash Point:23.0F,-5.0C
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:NONE.
Unusual Fire/Explosion Hazard:EXPOSURE TO HIGH TEMPERATURES MAY CAUSE
CONTAINERS TO BURST DUE TO PRESSURE BUILD-UP.

Accidental Release

Spill Release Procedures:PROTECT FROM IGNITION. COVER WITH ABSORBENT
MATERIAL. SCOOP INTO CONTAINERS. CLEAN UP RESIDUE WITH A DRY CLOTH.

Exposure Controls

Ventilation:GENERAL VENTILATION TO MAINTAIN VAPORS BELOW PEL.
Protective Gloves:SOLVENT-RESISTANT GLOVES.
Eye Protection:GOGGLES OR FULL FACE SHIELD.
Supplemental Safety and Health

Chemical Properties

HCC:F2
Spec Gravity:0.75
Solubility in Water:NEGLIGIBLE

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:OXIDES OF CARBON.

Disposal

Waste Disposal Methods:EPA NO: D001, HAZARDOUS WASTE. DISPOSE IN
COMPLIANCE WITH FEDERAL AND STATE REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.